DrawIndicatorOnTheChart

Library "DrawIndicatorOnTheChart"
this library is used to show an indicator (such RSI, CCI, MOM etc) on the main chart with indicator's horizontal lines in a window. Location of the window is calculated dynamically by last price movemements

drawIndicator(enabled, indicatorName, indicator1, indicator2, indicator3, indicatorcolors, period, indimax_, indimin_, levels, precision, xlocation, lnwidth)
draws the realted indicator on the chart
Parameters:
enabled (bool): if it's enabled to show
indicatorName (string): is the indicator name as string such "RSI", "CCI" etc
indicator1 (float): is first indicator you want to show, such rsi(close, 14), mom(close, 10) etc
indicator2 (float): is second indicator you want to show, such -DI of DMI
indicator3 (float): is third indicator you want to show, such ADX of DMI
indicatorcolors (array<color>)
period (int): is the length of the window to show
indimax_ (float): is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
indimin_ (float): is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc)doesn't have maximum value then use "na"
levels (array<float>): is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)
precision (int): is the precision/nuber of decimals that is used to show indicator values, for example for RSI set it 2
xlocation (int): is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle
lnwidth (int): is the line width of the indicator lines
Returns: none

Release Notes

v2

업데이트됨
drawIndicator(enabled, indicatorName, indicator1, indicator2, indicator3, indicatorcolors, period, indimax_, indimin_, levels, precision, xlocation, lnwidth, windowLabel)
draws the realted indicator on the chart
Parameters:
enabled (bool): if it's enabled to show
indicatorName (string): is the indicator name as string such "RSI", "CCI" etc
indicator1 (float): is first indicator you want to show, such rsi(close, 14), mom(close, 10) etc
indicator2 (float): is second indicator you want to show, such -DI of DMI
indicator3 (float): is third indicator you want to show, such ADX of DMI
indicatorcolors (array<color>)
period (int): is the length of the window to show
indimax_ (float): is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
indimin_ (float): is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
levels (array<float>): is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)
precision (int): is the precision/nuber of decimals that is used to show indicator values, for example for RSI set it 2
xlocation (int): is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle
lnwidth (int): is the line width of the indicator lines
windowLabel (string): is the label of the window
Returns: none

Release Notes

v5

업데이트됨
drawIndicator(enabled, indicatorName, indicator1, indicator2, indicator3, indicatorcolors, period, indimax_, indimin_, levels, precision, xlocation, lnwidth, padding)
draws the realted indicator on the chart
Parameters:
enabled (bool): if it's enabled to show
indicatorName (string): is the indicator name as string such "RSI", "CCI" etc
indicator1 (float): is first indicator you want to show, such rsi(close, 14), mom(close, 10) etc
indicator2 (float): is second indicator you want to show, such -DI of DMI
indicator3 (float): is third indicator you want to show, such ADX of DMI
indicatorcolors (array<color>)
period (int): is the length of the window to show
indimax_ (float): is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
indimin_ (float): is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc)doesn't have maximum value then use "na"
levels (array<float>): is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)
precision (int): is the precision/nuber of decimals that is used to show indicator values, for example for RSI set it 2
xlocation (int): is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle
lnwidth (int): is the line width of the indicator lines
padding (float): is the padding in percentage between chart and indicator window
Returns: none

Release Notes

v6

업데이트됨
drawIndicator(enabled, indicatorName, indicator1, indicator2, indicator3, indicator4, indicatorcolors, period, indimax_, indimin_, levels, precision, xlocation, lnwidth, padding)
draws the realted indicator on the chart
Parameters:
enabled (bool): if it's enabled to show
indicatorName (string): is the indicator name as string such "RSI", "CCI" etc
indicator1 (float): is first indicator you want to show, such rsi(close, 14), mom(close, 10) etc
indicator2 (float): is second indicator you want to show, such -DI of DMI
indicator3 (float): is third indicator you want to show, such ADX of DMI
indicator4 (float): is fourth indicator you want to show
indicatorcolors (array<color>)
period (int): is the length of the window to show
indimax_ (float): is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
indimin_ (float): is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc)doesn't have maximum value then use "na"
levels (array<float>): is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)
precision (int): is the precision/nuber of decimals that is used to show indicator values, for example for RSI set it 2
xlocation (int): is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle
lnwidth (int): is the line width of the indicator lines
padding (float): is the padding in percentage between chart and indicator window
Returns: none

Release Notes

v10

업데이트됨
drawIndicator(enabled, indicatorName, indicator1, indicator2, indicator3, indicatorcolors, period, indimax_, indimin_, levels, precision, xlocation, lnwidth)
draws the realted indicator on the chart
Parameters:
enabled (bool): if it's enabled to show
indicatorName (string): is the indicator name as string such "RSI", "CCI" etc
indicator1 (float): is first indicator you want to show, such rsi(close, 14), mom(close, 10) etc
indicator2 (float): is second indicator you want to show, such -DI of DMI
indicator3 (float): is third indicator you want to show, such ADX of DMI
indicatorcolors (array<color>)
period (int): is the length of the window to show
indimax_ (float): is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
indimin_ (float): is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc)doesn't have maximum value then use "na"
levels (array<float>): is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)
precision (int): is the precision/nuber of decimals that is used to show indicator values, for example for RSI set it 2
xlocation (int): is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle
lnwidth (int): is the line width of the indicator lines
Returns: none

Release Notes

v11

Release Notes

v12

Release Notes

v13

Release Notes

v14

Release Notes

v15

Release Notes

v16

Release Notes

v17

Release Notes

v18

Release Notes

v19

업데이트됨
drawIndicator(enabled, indicatorName, indicator1, indicator2, indicator3, indicatorcolors, period, indimax_, indimin_, levels, precision, xlocation, lnwidth)
Parameters:
enabled (bool)
indicatorName (string)
indicator1 (float)
indicator2 (float)
indicator3 (float)
indicatorcolors (array<color>)
period (int)
indimax_ (float)
indimin_ (float)
levels (array<float>)
precision (int)
xlocation (int)
lnwidth (int)

Release Notes

v20

Release Notes

v21

업데이트됨
drawIndicator(enabled, indicatorName, indicator1, indicator2, indicator3, indicatorcolors, period, indimax_, indimin_, levels, precision, xlocation, lnwidth)
draws the realted indicator on the chart
Parameters:
enabled (bool): if it's enabled to show
indicatorName (string): is the indicator name as string such "RSI", "CCI" etc
indicator1 (float): is first indicator you want to show, such rsi(close, 14), mom(close, 10) etc
indicator2 (float): is second indicator you want to show, such -DI of DMI
indicator3 (float): is third indicator you want to show, such ADX of DMI
indicatorcolors (array<color>)
period (int): is the length of the window to show
indimax_ (float): is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
indimin_ (float): is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc)doesn't have maximum value then use "na"
levels (array<float>): is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)
precision (int): is the precision/nuber of decimals that is used to show indicator values, for example for RSI set it 2
xlocation (int): is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle
lnwidth (int): is the line width of the indicator lines
Returns: none

Release Notes

v22

업데이트됨
drawIndicator(enabled, indicatorName, indicator1, indicator2, indicator3, indicatorcolors, period, indimax_, indimin_, levels, xlocation, lnwidth)
draws the realted indicator on the chart
Parameters:
enabled (bool): if it's enabled to show
indicatorName (string): is the indicator name as string such "RSI", "CCI" etc
indicator1 (float): is first indicator you want to show, such rsi(close, 14), mom(close, 10) etc
indicator2 (float): is second indicator you want to show, such -DI of DMI
indicator3 (float): is third indicator you want to show, such ADX of DMI
indicatorcolors (array<color>)
period (int): is the length of the window to show
indimax_ (float): is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
indimin_ (float): is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc)doesn't have maximum value then use "na"
levels (array<float>): is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)
xlocation (int): is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle
lnwidth (int): is the line width of the indicator lines
Returns: none

Release Notes

v23

Release Notes

v24

업데이트됨
drawIndicator(enabled, indicatorName, indicator1, indicatorcolor, period, indimax_, indimin_, levels, precision, xlocation, lnwidth)
draws the realted indicator on the chart
Parameters:
enabled (bool): if it's enabled to show
indicatorName (string): is the indicator name as string such "RSI", "CCI" etc
indicator1 (float): is first indicator you want to show, such rsi(close, 14), mom(close, 10) etc
indicatorcolor (color): is the color of indicator line
period (int): is the length of the window to show
indimax_ (float): is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
indimin_ (float): is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc)doesn't have maximum value then use "na"
levels (array<float>): is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)
precision (int): is the precision/nuber of decimals that is used to show indicator values, for example for RSI set it 2
xlocation (int): is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle
lnwidth (int): is the line width of the indicator lines
Returns: none

Release Notes

v25

Release Notes

v26

더해짐
findIndiLoc()

getIndiLevel(indi, indimax, indimin, top, bottom)
Parameters:
indi (float)
indimax (float)
indimin (float)
top (float)
bottom (float)

findLowestTimeframe(timeframes)
Parameters:
timeframes (array<int>)

findLabelIndex(timeframes, lowestTimeframe)
Parameters:
timeframes (array<int>)
lowestTimeframe (int)

drawMultipleIndicators(enabled, title, windowNumber, indicatorValues, timeframes, indicatorColors, period, indimax_, indimin_, levels, precision, xlocation, lnwidth)
Parameters:
enabled (bool)
title (string)
windowNumber (int)
indicatorValues (array<float>)
timeframes (array<int>)
indicatorColors (array<color>)
period (int)
indimax_ (float)
indimin_ (float)
levels (array<float>)
precision (int)
xlocation (int)
lnwidth (int)

없어짐
drawIndicator(enabled, indicatorName, indicator1, indicatorcolor, period, indimax_, indimin_, levels, precision, xlocation, lnwidth)
draws the realted indicator on the chart

Release Notes

v27

없어짐
findIndiLoc()

Release Notes

v28

Pine library

In true TradingView spirit, the author has published this Pine code as an open-source library so that other Pine programmers from our community can reuse it. Cheers to the author! You may use this library privately or in other open-source publications, but reuse of this code in publications is governed by House Rules.

brasscoin

Disclaimer

The information and publications are not meant to be, and do not constitute, financial, investment, trading, or other types of advice or recommendations supplied or endorsed by TradingView. Read more in the Terms of Use.

Pine library

brasscoin