Goldbach - nonGB time trackerTracks nonGB prints with a purple Ray until that print is violated by price. It is written in a way that allows you to connect it with any GoldBach Time indicator that produces source.input functions (almost every indicator does).
Instructions:
1.Add a GoldBach Time indicator and nonGBTrack to your chart.
2.Open the Settings for nonGBTrack.
3.Select a GBtime indicator source for both the high and low options (I connect it to dmn's AMD-Goldbach (beta 2.15c) nGB Time Swing High Created and nGB Time Swing Low Created on the dropdown menu for signal source).
4.You must change to your source each time the indicator is added to a new chart (this is the only way to allow them to work together on TV with their closed source indicator rules).
Big Bulge.
(Goldbach Levels and Time introduced by Hopiplaka. See Hopiplaka's X page and discord to get the book on Goldbach. x.com )
Pivot points and levels
Market Sell-Off GaugeOVERVIEW
The Market Sell‑Off Gauge identifies high‑conviction, risk‑off entry opportunities by detecting broad market sell‑off behavior and rising stablecoin dominance, then confirming risk‑off sentiment via NDX weakness, VIX spikes, and elevated volume. It uses fuzzy logic and sigmoid scaling to convert raw signals into a smooth, bounded metric.
FEATURES
Sell‑Off Detection - calculates percentage drops in the primary asset over a user‑defined lookback.
Stablecoin Dominance Surge - tracks combined USDT/USDC dominance rises as a proxy for on‑chain “flight to safety.”
Macro Confirmation
NDX Weakness (NASDAQ‑100)
VIX Spikes (CBOE Volatility Index)
Elevated Volume on declining bars
Fuzzy Logic & Scaling - component values feed into a fuzzy‑logic membership scor and are passed through a sigmoid compressor (–1 to +1). Weighted aggregation derives the final result of the gauge (or metric).
VISUALISATION
Continuous line plot - Smoothed metric (–1 to +1), colored cold‑to‑warm.
Entry circles - Highlighted when all conditions (fuzzy or crisp) are met after the time offset.
Time‑Offset marker - Vertical line/label showing the user‑specified “start” bar.
Component table - Displays real‑time % changes & volume multiples in the lower right of the indicator.
USAGE
Asset drop % - The threshold percent decline to register a sell‑off.
Stables rise % - The threshold percent increase in stablecoin dominance to qualify as a “flight to safety.”
NDX drop % - The threshold percent decline in the NASDAQ‑100 for macro confirmation.
VIX rise % - The threshold percent increase in VIX. Contributes to risk‑off validation.
Volume Multiplier - Defines how many times above SMA volume must rise to confirm conviction.
Lookback Period - Controls the number of bars over which % changes are measured.
Time Offset - Point in time beyond which bars to “fade” historical signals, enables focus on recent data only.
Fuzzy Logic Settings - Enables fuzzy scoring and set membership threshold & sensitivity.
Weights - allows for adjusting the relative importance of each component (Asset, Stables, NDX, VIX, Volume).
Sigmoid Steepness (k) - Controls curve steepness for compression (0.1 = very flat → 5.0 = very sharp S‑curve).
Chart & settings
Best applied on 4H or Daily BTCUSD (or similar) charts to capture meaningful sell‑off events.
Combine with broader trend filters (e.g., moving averages) for trend‑aligned entries.
Adjust Sigmoid Steepness and Membership Sensitivity to fine‑tune signal crispness vs. smoothness. Refer to tooltips.
Disclaimer
This indicator is intended for educational purposes only. Always perform your own due diligence before making financial decisions.
9AM/10AM opensPrice lines for the 9AM/10AM hourly candle opens. (OLHC/OHLC)
Lines extend only to the next hourly candle open (12 5m bars, can customize in source code)
Color customizable
R2 Breakout Simple StrategyStrategy working with R2 level from Pivot Points indicador in order to detect strenght on bullish direction and enter once the price crosses the level.
Working on EURUSD and other Forex pairs.
RSI Divergence (Double Peak Only)RSI Divergence (Double Peak Only)RSI Divergence (Double Peak Only)RSI Divergence (Double Peak Only)RSI Divergence (Double Peak Only)RSI Divergence (Double Peak Only)RSI Divergence (Double Peak Only)RSI Divergence (Double Peak Only)RSI Divergence (Double Peak Only)RSI Divergence (Double Peak Only)RSI Divergence (Double Peak Only)RSI Divergence (Double Peak Only)
KEY MARKET SESSION EU/US RANGE LEVELS - KLT🔹 KEY MARKET SESSION EU/US RANGE LEVELS - KLT
This indicator highlights critical trading levels during the European and U.S. sessions, with Overbought (OB) and Oversold (OS) markers derived from each session's price range.
It’s designed to support traders in identifying key zones of interest and historical price reactions across sessions.
✳️ Features
🕒 Session Recognition
European Session (EU): 08:00 to 14:00 UTC
United States Session (US): 14:30 to 21:00 UTC
The indicator automatically detects the current session and updates levels in real time.
📈 Overbought / Oversold (OB/OS) Levels
Helps identify potential reversal or reaction zones.
🔁 Previous Session OB/OS Crosses
OB/OS levels from the previous session are plotted as white crosses during the opposite session:
EU OB/OS shown during the US session
US OB/OS shown during the EU session
These levels act as potential price targets or reaction areas based on prior session behavior.
🎨 Session-Based Color Coding
EU Session
High/Low: Orange / Fuchsia
OB/OS: Orange / Lime
Previous OB/OS: White crosses during the US session
US Session
High/Low: Aqua / Teal
OB/OS: Aqua / Lime
Previous OB/OS: White crosses during the EU session
🧠 How to Use
Use the OB/OS levels to gauge potential turning points or extended moves.
Watch for previous session crosses to spot historically relevant zones that may attract price.
Monitor extended High/Low lines as potential magnets for price continuation.
🛠 Additional Notes
No repainting; levels are session-locked and tracked in real time.
Optimized for intraday strategies, scalping, and session-based planning.
Works best on assets with clear session behavior (e.g., forex, indices, major commodities).
⚠️ Disclaimer
This tool is intended for educational purposes. Always manage risk appropriately and use confluence with other analysis tools.
🔐 Copyright © KEY LEVELS TRADING
Dax 8:15am School run Target Lines V2 (lower TF) Taken from Tom Hougaard basic School run break out strategy. enabling me target exit points. Works best on a 7m break out i find. Close within range and close trade and usually an Anti.
CDP - Counter-Directional-Pivot🎯 CDP - Counter-Directional-Pivot
📊 Overview
The Counter-Directional-Pivot (CDP) indicator calculates five critical price levels based on the previous day's OHLC data, specifically designed for multi-timeframe analysis. Unlike standard pivot points, CDP levels are calculated using a unique formula that identifies potential reversal zones where price action often changes direction.
⚡ What Makes This Script Original
This implementation solves several technical challenges that existing pivot indicators face:
🔄 Multi-Timeframe Consistency: Values remain identical across all timeframes (1m, 5m, 1h, daily) - a common problem with many pivot implementations
🔒 Intraday Stability: Uses advanced value-locking technology to prevent the "stepping" effect that occurs when pivot lines shift during the trading session
💪 Robust Data Handling: Optimized for both liquid and illiquid stocks with enhanced data synchronization
🧮 CDP Calculation Formula
The indicator calculates five key levels using the previous day's High (H), Low (L), and Close (C):
CDP = (H + L + C) ÷ 3 (Central Decision Point)
AH = 2×CDP + H – 2×L (Anchor High - Strong Resistance)
NH = 2×CDP – L (Near High - Moderate Resistance)
AL = 2×CDP – 2×H + L (Anchor Low - Strong Support)
NL = 2×CDP – H (Near Low - Moderate Support)
✨ Key Features
🎨 Visual Elements
📈 Five Distinct Price Levels: Each with customizable colors and line styles
🏷️ Smart Label System: Shows exact price values for each level
📋 Optional Value Table: Displays all levels in an organized table format
🎯 Clean Chart Display: Minimal visual clutter while maximizing information
⚙️ Technical Advantages
🔐 Session-Locked Values: Prices are locked at market open, preventing intraday shifts
🔄 Multi-Timeframe Sync: Perfect consistency between daily and intraday charts
✅ Data Validation: Built-in checks ensure reliable calculations
🚀 Performance Optimized: Efficient code structure for fast loading
💼 Trading Applications
🔄 Reversal Zones: AH and AL often act as strong turning points
💥 Breakout Confirmation: Price movement beyond these levels signals trend continuation
🛡️ Risk Management: Use levels for stop-loss and take-profit placement
🏗️ Market Structure: Understand daily ranges and potential price targets
📚 How to Use
🚀 Basic Setup
Add the indicator to your chart (works on any timeframe)
Customize colors for easy identification of support/resistance zones
Enable the value table for quick reference of exact price levels
📈 Trading Strategy Examples
🟢 Long Bias: Look for bounces at NL or AL levels
🔴 Short Bias: Watch for rejections at NH or AH levels
💥 Breakout Trading: Enter positions when price decisively breaks through anchor levels
↔️ Range Trading: Use CDP as the central reference point for range-bound markets
🎯 Advanced Strategy Combinations
RSI Integration for Enhanced Signals: 📊
📉 Oversold Bounces: Combine RSI below 30 with price touching AL/NL levels for high-probability long entries
📈 Overbought Rejections: Look for RSI above 70 with price rejecting AH/NH levels for short opportunities
🔍 Divergence Confirmation: When RSI shows bullish divergence at support levels (AL/NL) or bearish divergence at resistance levels (AH/NH), it often signals stronger reversal potential
⚡ Momentum Confluence: RSI crossing 50 while price breaks through CDP can confirm trend direction changes
⚙️ Configuration Options
🎨 Line Customization: Adjust width, style (solid/dashed/dotted), and colors
👁️ Display Preferences: Toggle individual levels, labels, and value table
📍 Table Position: Place the value table anywhere on your chart
🔔 Alert System: Get notifications when price crosses key levels
🔧 Technical Implementation Details
🎯 Data Reliability
The script uses request.security() with lookahead settings to ensure historical accuracy while maintaining real-time functionality. The value-locking mechanism prevents the common issue where pivot levels shift during the trading day.
🔄 Multi-Timeframe Logic
⏰ Intraday Charts: Display previous day's calculated levels as stable horizontal lines
📅 Daily Charts: Show current day's levels based on yesterday's OHLC
🔍 Consistency Check: All timeframes reference the same source data
🤔 Why CDP vs Standard Pivots?
Counter-Directional Pivots often provide more accurate reversal points than traditional pivot calculations because they incorporate the relationship between high/low ranges and closing prices more effectively. The formula creates levels that better reflect market psychology and institutional trading behaviors.
💡 Best Practices
💧 Use on liquid markets for most reliable results
📊 RSI Combination: Add RSI indicator for overbought/oversold confirmation and divergence analysis
📊 Combine with volume analysis for confirmation
🔍 Consider multiple timeframe analysis (daily levels on hourly charts)
📝 Test thoroughly in paper trading before live implementation
💪 Example Market Applications
NASDAQ:AAPL AAPL - Tech stock breakouts through AH levels
$NYSE:SPY SPY - Index trading with CDP range analysis
NASDAQ:TSLA TSLA - Volatile stock reversals at AL/NL levels
⚠️ This indicator is designed for educational and analytical purposes. Always combine with proper risk management and additional technical analysis tools.
NQ Key Levels & Trend AnalysisThis indicator will plot the key high, low, current price (as a reference), and the identified support and resistance levels as horizontal lines. I'll also include a Simple Moving Average (SMA) to help visualize the intermediate trend.
NQ Key Levels & Trend Analysis version 1.0
Sri_Auto Fibonacci Sri_Auto Fibonacci is an advanced and original implementation of an automatic Fibonacci retracement plotting tool that uses price action pivots and volatility to dynamically draw key Fibonacci levels. Unlike static manual fib drawing, this tool automates the process by reacting to market structure using pivot detection logic and ATR-based deviation confirmation.
📐 What It Does
Detects major high/low pivot swings on a user-selected higher timeframe (default: Daily).
Uses ATR-based deviation threshold to avoid minor or noisy swings.
Automatically plots Fibonacci retracement levels (0, 0.236, 0.382, 0.5, 0.618, 0.786, 1.0).
Displays a dashed line connecting the two pivot points.
Draws horizontal lines and labels at each selected level.
Shows a status label if valid pivots are not yet found.
⚙️ User Inputs
Deviation % Multiplier: Adjusts the sensitivity based on ATR% to ignore small fluctuations.
Pivot Depth: Controls how many bars before/after a point are used to confirm a pivot.
Extend Lines Left/Right: Allows you to keep the levels visible into past/future bars.
Color Customization: Choose custom colors for each level.
Select Which Levels to Show: Toggle levels like 0.382 or 0.786 on/off based on preference.
🧠 How It Works
Pivot Detection
A price is considered a valid high/low pivot if it is the highest/lowest point within a lookback window (depth).
Deviation Filter
To avoid false pivots, the script calculates the % deviation between the new pivot and the last one using ATR/Close. Only when this exceeds a user-defined threshold, the new pivot is accepted.
Fibonacci Calculation
Once a valid new pivot is confirmed, the script draws levels between the latest two swings using the standard Fibonacci ratios.
✅ Key Features
Non-repainting logic for confirmed pivots
Works across all symbols and asset classes
Fully customizable and extendable
Clean, lightweight, and script-efficient
Built with Pine Script v5 standards
Uses request.security() to ensure pivot detection from the selected HTF
No proprietary or obfuscated code
📊 Best Use Cases
Identifying key retracement zones during pullbacks
Confirming support/resistance with fib confluence
Planning entries/exits around dynamic fib areas
Works well in swing trading setups
📌 Important Notes
This tool does not repaint once pivot structure is confirmed.
Designed as a support tool, not a signal generator.
Can be combined with RSI, MACD, volume, or price action for better confirmation.
📜 Disclaimer
This script is developed independently and shared publicly for educational and analytical use only. It is not intended to copy or infringe upon any commercial tool or proprietary indicator. Use at your own discretion. No investment advice is implied.
📧 For feedback or suggestions, feel free to connect through TradingView profile messages.
💡 Happy Trading!
Volume and the SMA plus one standard deviationThe 'Volume and the SMA plus one standard deviation' indicator is designed to help traders analyze market activity by visualizing volume dynamics. It plots the current volume alongside two key metrics:
1) The Simple Moving Average (SMA) of volume
2) The SMA plus one standard deviation, enabling traders to identify significant volume spikes that may signal potential price movements.
How It Works:
Volume (blue column): Displays the trading volume for each bar, highlighting periods of high or low market activity.
Basis Volume (orange Line): Represents the SMA of volume over a user-defined period (default: 20 bars). Volumes above this line indicate increased market activity.
SD2 Volume (dark blue Line): Shows the SMA plus one standard deviation of volume. Volumes exceeding this threshold suggest extreme activity, often associated with breakouts, reversals, or significant market events.
Trading Applications:
Confirming Breakouts: A volume spike above the SD2 Volume during a price breakout increases the likelihood of a sustained move. Use this to confirm entries in trend-following strategies.
Identifying Trend Strength: Volumes consistently above the Basis Volume signal strong market participation, supporting trend continuation trades.
Avoiding False Signals: Low volumes below the Basis Volume suggest consolidation or weak movements, helping traders avoid false breakouts or reversals.
Event Detection: Extreme volumes above SD2 Volume often coincide with news events or large player activity, prompting traders to prepare for volatility.
Settings:
Volume SMA Length (default: 20): Adjust the period for calculating the SMA and standard deviation. Shorter periods (e.g., 5–10) increase sensitivity for intraday trading, while longer periods (e.g., 20–50) suit higher timeframes.
Назначение: Индикатор 'Volume and the SMA plus one standard deviation' помогает трейдерам анализировать рыночную активность, визуализируя динамику объемов. Он отображает текущий объем торгов, скользящую среднюю (SMA) объема и SMA плюс одно стандартное отклонение. Позволяя выявлять значительные всплески объема, которые могут сигнализировать о потенциальных движениях цены.
Как работает:
Объем: Показывает объем торгов для каждого бара, выделяя периоды высокой или низкой активности рынка.
Basis Volume line: Представляет SMA объема за заданный период (по умолчанию: 20 баров). Объемы выше этой линии указывают на повышенную рыночную активность.
SD2 Volume line: Показывает SMA плюс одно стандартное отклонение объема. Объемы, превышающие этот уровень, свидетельствуют об экстремальной активности, часто связанной с пробоями, разворотами или значимыми событиями на рынке.
Применение в торговле:
Подтверждение пробоев: Всплеск объема выше SD2 Volume line во время пробоя цены увеличивает вероятность продолжения движения. Используйте для подтверждения входов в трендовые стратегии.
Оценка силы тренда: Объемы, стабильно превышающие Basis Volume line, сигнализируют о сильном участии игроков рынка, поддерживая сделки по тренду.
Избежание ложных сигналов: Низкие объемы ниже Basis Volume указывают на консолидацию или слабые движения, помогая избегать ложных пробоев или разворотов.
Обнаружение событий: Экстремальные объемы выше SD2 Volume часто совпадают с новостями или действиями крупных игроков, что побуждает трейдеров готовиться к волатильности.
Настройки:
Volume SMA Length (по умолчанию: 20)
Настройте период для расчета SMA и стандартного отклонения.
Меньшие значения (5–10) повышают чувствительность для внутридневной торговли.
Большие (20–50) подходят для старших таймфреймов.
RJ Trend TradeRJ Trend Trade
Summary
The RJ Trend Trade indicator is a comprehensive trading tool designed to identify trend-based opportunities using a combination of a lagging Parabolic SAR and Bill Williams Fractals. It provides clear visual signals for entries, take-profits, re-entries, and exits directly on your chart. With a built-in ATR-based stop loss and a fully configurable alert system, this indicator is built to be a complete framework for discretionary or systematic traders.
Core Strategy
The indicator's logic is built upon two robust technical concepts:
Lagging Parabolic SAR (PSAR) for Trend Direction and Entries/Exits: The core trend direction and primary entry/exit signals are determined by a crossover between the price and a lagging PSAR. A cross of the lagging PSAR above the high signals a potential buy entry, while a cross below the low signals a potential sell entry. The reverse crossovers act as the primary exit signals, indicating a potential trend reversal.
Bill Williams Fractals for Take-Profit (TP) and Re-Entries (RE): Once a trade is active, the indicator uses breakouts of recent Bill Williams Fractals to identify tactical opportunities.
Take-Profit (TP): When price breaks a fractal in the direction of the trend (e.g., breaks a higher-high fractal in an uptrend), it signals a potential area to take partial or full profits.
Re-Entry (RE): When price breaks a fractal against the primary trend (e.g., breaks a higher-high fractal during a downtrend), it can signal a potential re-entry point to add to the position, often at a more favorable price.
Key Features
Clear Visual Signals: Displays easy-to-read labels on the chart for all key trading events:
BUY / SELL: Main entry signals.
TP: Take-Profit signals.
RE: Re-Entry signals.
EXIT: Trend reversal exit signals based on PSAR.
SL: Stop Loss hit signals.
ATR-Based Stop Loss: Includes an optional, fully configurable Average True Range (ATR) stop loss to help manage risk from the moment a position is opened.
Comprehensive Alert System: Every single signal generated by the indicator (Buy, Sell, TP, RE, Exit, and SL) can be used to create a custom alert in TradingView. This allows for seamless integration with mobile notifications, email, or webhook-based automation.
Highly Customizable: Provides a detailed settings menu to fine-tune every aspect of the strategy, including PSAR parameters, Fractal lookbacks, and signal visibility.
Position Direction Control: Easily configure the indicator to show Buy & Sell, Buy Only, or Sell Only signals to match your market bias.
How to Use
Entry Signals: Look for BUY (green label below a candle) or SELL (red label above a candle) signals to initiate a trade. These appear when the lagging PSAR indicates a new trend may be starting.
Managing the Trade:
Take-Profit (TP): When a TP label appears, consider taking some profit off the table.
Re-Entry (RE): When an RE label appears, it suggests a potential opportunity to add to your existing position.
Stop Loss (SL): The red line indicates your ATR-based stop loss level. If the price touches this line, an SL label will appear, and the indicator will automatically close the conceptual trade.
Exit Signals: An EXIT label (based on the PSAR reversing) signals that the primary trend may have ended, and it is time to close the position.
Setting Up Alerts
This indicator is designed for full alert integration.
Add the indicator to your chart.
Click the 'Alert' button in TradingView's top toolbar.
In the 'Condition' dropdown, select "RJ Trend Trade".
In the second dropdown, choose the specific signal you want an alert for (e.g., "Enter-Buy", "TP-Sell", "StopLoss-Buy").
Configure your notification preferences and click "Create".
Disclaimer: This indicator is a tool for technical analysis and should not be considered financial advice. All trading involves risk. Please backtest this indicator thoroughly and use proper risk management before trading with real capital.
Worldwide Sessions and Open Range BreakoutThis script shows when the various normal market hours for each of the major worldwide markets (Asia, New York, and London). It also draws a line on the opening range for each of these market sessions. The opening range defaults to the first 15 minutes of the session, but this can be customized.
This script does automatically handle the session times regardless of your time zone or what time frame you are on. No need to set anything! This probably can't handle non-normal trading days, such as partial days.
This script is made for futures, but would likely work for other markets, like Forex.
Universal Scalper: Candle OR Momentum (VWAP Optional)A universal scalping alert tool that triggers based on candle and/or momentum pattern reversals, with or without the optional VWAP proximity filter.
How to Use
To see more momentum signals:
- Set Require VWAP Proximity for Momentum Alerts? to false in the settings.
- Try shorter EMAs (8/21 or 5/20).
- Optionally, relax the RSI filter (e.g., <70 for longs, >30 for shorts).
To require VWAP for both:
- Set both toggles to true.
Debug:
Aqua/fuchsia squares = momentum signals.
Lime/orange circles = candle pattern signals.
Main triangles = overall alert.
Summary
Momentum alerts are rare when too many filters are combined.
This script lets you control if VWAP proximity is required for each alert type, and visually shows which logic is firing.
For more signals, relax filters and/or use shorter EMAs.
This will ensure you get both candle and momentum alerts, with full control over VWAP filtering and easy debugging.
Momentum Flip Pro - Advanced ZigZag Trading SystemMomentum Flip Pro - Advanced ZigZag Trading System
Complete User Guide
📊 What This Indicator Does
The Momentum Flip Pro is an advanced position-flipping trading system that automatically identifies trend reversals using ZigZag patterns combined with momentum analysis. It's designed for traders who want to always be in the market, flipping between long and short positions at optimal reversal points.
Key Features:
Automatically flips positions at each ZigZag reversal point
Dynamic stop loss placement at exact ZigZag levels
Real-time trading dashboard with performance metrics
Capital tracking and ROI calculation
Three momentum engines to choose from
🎯 How It Works
Entry Signal: When a ZigZag point appears (circle on chart), the indicator:
Exits current position (if any)
Immediately enters opposite position
Places stop loss at the exact ZigZag price
Exit Signal: Positions are closed when the next ZigZag appears, then immediately reversed
Position Management:
Long Entry: ZigZag bottom (momentum turns UP)
Short Entry: ZigZag peak (momentum turns DOWN)
Stop Loss: Always at the ZigZag entry price
Take Profit: Next ZigZag point (automatic position flip)
⚙️ Recommended Settings
For Day Trading (5m-15m timeframes):
Momentum Engine: Quantum
- RSI Length: 9-12
- Quantum Factor: 3.5-4.0
- RSI Smoothing: 3-5
- Threshold: 8-10
For Swing Trading (1H-4H timeframes):
Momentum Engine: MACD
- Fast Length: 12
- Slow Length: 26
- Signal Smoothing: 9
- MA Type: EMA
For Position Trading (Daily):
Momentum Engine: Moving Average
- Average Type: EMA or HMA
- Length: 20-50
📈 How to Use for Trading
Add to Chart:
Add indicator to your chart
Set your starting capital
Choose your preferred momentum engine
Understanding Signals:
Green circles: Strong bullish momentum reversal
Red circles: Strong bearish momentum reversal
Purple circles: Normal momentum reversal
Entry labels: Show exact entry points with tooltips
Trading Rules:
Enter LONG when you see an up arrow + green/purple circle
Enter SHORT when you see a down arrow + red/purple circle
Stop loss is automatically at the ZigZag level
Hold until next ZigZag appears (exit + reverse)
Risk Management:
Risk per trade = Entry Price - Stop Loss
Position size = (Capital * Risk %) / Risk per trade
Recommended risk: 1-2% per trade
💡 Best Practices
Market Conditions:
Works best in trending markets
Excellent for volatile pairs (crypto, forex majors)
Avoid during low volume/consolidation
Timeframe Selection:
Lower timeframes (5m-15m): More signals, higher noise
Higher timeframes (1H+): Fewer signals, higher reliability
Sweet spot: 15m-1H for most traders
Momentum Engine Selection:
Quantum: Best for volatile markets (crypto, indices)
MACD: Best for trending markets (forex, stocks)
Moving Average: Best for smooth trends (commodities)
📊 Dashboard Interpretation
The trading dashboard shows:
Current Capital: Your running balance
Position: Current trade direction
Entry/Stop: Your risk levels
Statistics: Win rate and performance
ROI: Overall return on investment
⚠️ Important Notes
Always Active: This system is always in a position (long or short)
No Neutral: You're either long or short, never flat
Automatic Reversal: Positions flip at each signal
Stop Loss: Fixed at entry ZigZag level (doesn't trail)
🎮 Quick Start Guide
Beginners: Start with default settings on 1H timeframe
Test First: Use paper trading to understand the signals
Small Size: Begin with 1% risk per trade
Track Results: Monitor the dashboard statistics
Adjust: Fine-tune momentum settings based on results
🔧 Customization Tips
Color Signals: Enable to see momentum strength
Dashboard Position: Move to preferred screen location
Visual Settings: Adjust colors for your theme
Alerts: Set up for automated notifications
This indicator is ideal for traders who prefer an always-in-market approach with clear entry/exit rules and automated position management. The key to success is choosing the right momentum engine for your market and maintaining disciplined risk management.
Multi-Timeline 1.0Multi-TimeLines 1.0 - Comprehensive Description
WHAT IT DOES:
This indicator creates dynamic horizontal support/resistance lines based on opening prices captured at user-defined New York times. Unlike static horizontal lines, these levels automatically appear and disappear based on sophisticated session logic, providing traders with time-sensitive reference levels that adapt to market sessions.
HOW IT WORKS - TECHNICAL IMPLEMENTATION:
1.
Timezone Conversion Engine:
The script uses Pine Script's "America/New_York" timezone functions to ensure all time calculations are based on NY time, regardless of the user's chart timezone. This eliminates confusion and provides consistent behavior across global markets.
2.
Dual-Category Time Classification System:
The indicator employs a unique two-category classification system:
Category A (16:00-23:59 NY): Evening times that extend overnight until next day 15:59 NY
Category B (00:00-15:59 NY): Day times that extend until same day 15:59 NY
This classification handles the complex logic of overnight sessions and prevents lines from incorrectly resetting at midnight for evening times.
3. Price Capture Mechanism:
Uses precise time-hit detection with backup systems for edge cases (especially midnight 00:00). When a specified time occurs, the script captures the bar's opening price and stores it in persistent variables using Pine Script's var declarations.
4. Session-Aware Display Logic:
Lines only appear during their designated "display windows" - periods when the captured price level is relevant. The script uses conditional plotting with plot.style_linebr to create clean breaks when lines are inactive.
5. Smart Reset System:
Different reset behaviors based on time classification:
Category A times persist across midnight (for overnight analysis)
Category B times reset on day changes (except 00:00 which captures AT day change)
Automatic cleanup when display windows close
ORIGINALITY & UNIQUE FEATURES:
1. Overnight Session Handling:
Unlike basic horizontal line tools, this script properly handles overnight spans for evening times, making it invaluable for analyzing gaps and overnight price action.
2. Automatic Session Management:
No manual line drawing required - the script automatically manages when lines appear/disappear based on NY market sessions (15:59 close, 18:00 after-hours start).
3. Time-Window Display Logic:
Lines only show during relevant periods, reducing chart clutter and focusing attention on currently active levels.
TRADING CONCEPTS & APPLICATIONS:
1. Session-Based Analysis:
Capture opening prices at key session times:
00:00 NY: Sydney/Asian session start
03:00 NY: London pre-market
08:00 NY: London session open
09:30 NY: NYSE opening bell
18:00 NY: After-hours start
2. Gap Analysis:
Evening times (20:00-23:59) that extend overnight are particularly useful for:
Identifying potential gap-fill levels
Tracking overnight high/low breaks
Setting reference points for next-day trading
3. Support/Resistance Framework:
Opening prices at significant times often act as:
Intraday support/resistance levels
Reference points for breakout/breakdown analysis
Pivot levels for mean reversion strategies
HOW TO USE:
1. Time Input:
Enter times in "HH:MM" format using 24-hour NY time:
"09:30" for NYSE open
"15:30" for late-day reference
"20:00" for evening level (extends overnight)
2. Line Behavior:
Blue/Green/Cyan/Red lines: Your custom times
Yellow line: After-hours day open (18:00 NY start)
Lines appear with breaks during inactive periods
3. Strategic Setup:
Use 2-3 key session times for your trading style
Combine morning times (immediate reference) with evening times (overnight analysis)
Toggle after-hours line based on your market focus
CALCULATION METHOD:
The script uses direct opening price capture (no smoothing or averaging) at precise time hits, ensuring the most accurate representation of actual market levels at specified times. This raw price approach maintains the integrity of actual market opening prices rather than manipulated or calculated values.
This method is particularly effective because opening prices at significant times often represent institutional order flow and can act as magnetic levels throughout subsequent sessions.
ADR Pivot LevelsThe ADR (Average Daily Range) indicator shows the average range of price movement over a trading day. The ADR is used to estimate volatility and to determine target levels. It helps to set Take-Profit and Stop-Loss orders. It is suitable for intraday trading on lower time frames.
The “ADR Pivot Levels” produces a sequence of horizontal line levels above and below the Center Line (reference level). They are sized based on the instrument's volatility, representing the average historical price movement on a selected higher timeframe using the average daily range (ADR) indicator.
Previous Day High & Low)Previous Day High & Low (PDH/PDL)
This simple but essential tool plots the previous day's high and low as dynamic horizontal lines across the current trading session. Ideal for traders who rely on key support and resistance levels, this indicator automatically updates at the start of each new day and extends the levels across the chart.
🔹 Features:
Automatically tracks and draws the previous day’s high and low.
Lines update cleanly at each new session.
Helps identify breakout and reversal zones.
Perfect for scalpers, intraday traders, and anyone watching for reactions at key levels.
NY opennew york open.
new york open hours of the past two weeks up until two days ahead are shown as vertical lines which is great for both analyzing past data and seeing where would future new york open align with compared to your own future analysis.
TradeJorno - Time + Price Levels
Tired of manually drawing and updating important ICT or SMC time and price levels on your charts every day?
Here’s an indicator to draw important TIME and PRICE levels automatically.
Here’s what you can highlight in realtime on your charts:
1. Previous major highs and lows
⁃ Previous daily and weekly highs and low
- Weekly dividing lines
2. Session highs/lows
⁃ Plot the high and low of Asia and London sessions.
⁃ Customise the timeframe and appearance on the chart.
- Previous session settlement price.
3. Various price levels
⁃ Pre-market opening prices : midnight, 7:30 and 8:30
⁃ Regular market opening prices: 9:30, 10:00, 14:00
- end of session settlement prices
4. Market opening range high and low
⁃ Lines extending throughout the current session
⁃ Customise the timeframe and appearance on the chart.
5. ICT Macro times
- Draw customisable vertical lines and labels to indicate the start of each ICT macro
period.
Let us know in the comments below if there’s anything else we need to add!
Pair TradingPAIR TRADING
Description:
This indicator is a simple and intuitive tool for rotating between two assets based on their relative price ratio. By comparing the prices of Asset A and Asset B, it plots a “ratio line” (gray) with dynamic upper and lower boundaries (red and blue).
When the ratio reaches the red line, Asset A is expensive → rotate out of A and into B.
When the ratio touches the blue line, Asset A is cheap → rotate back into A.
The chart also shows:
🔹 Background highlights for visual cues
🔹 “Rotate to A” or “Rotate to B” markers for easy decisions
🔹 A live summary table with mean ratio, upper/lower boundaries, and current ratio
How to Use:
Select Asset A and Asset B in the settings.
Adjust the Lookback Period and Threshold if needed.
Watch the gray ratio line as it moves:
Above red line? → Consider rotating into B
Below blue line? → Consider rotating into A
Use the background color changes and rotation labels to spot clear rotation opportunities!
Why Pair Trading?
Pair trading is a powerful way to manage a portfolio because it neutralizes market direction risk and focuses on relative value.
By rotating between correlated assets, you can:
Smooth out returns
Avoid holding a weak asset too long
Capture reversion when assets diverge too far
This approach can enhance risk-adjusted returns and help keep your portfolio balanced and nimble!
How to Pick Pairs:
Choose assets with strong correlation or similar drivers.
Look for common trends (sector, macro).
Start with assets you know best (high-conviction ideas).
Make sure both have good liquidity for reliable trading!
TO HELP FIND CORRELATED ASSETS:
Use the Correlation Coefficient indicator in TradingView:
Click Indicators
Search for “Correlation Coefficient”
Add it to your chart
Input the symbol of the second asset (e.g., if you’re on MSTR, input TSLA).
This plots the rolling correlation coefficient — super helpful!
Pair trading can turn big swings into steady rotations and help you stay active even when the market is choppy. It’s a simple, practical approach to keep your portfolio balanced.
ICT Directional FVG Indicator (Buffered SL)This is the first indicator I have ever made, and I am very new to Pine Script. I’ve tried my best to create this as a strategy, but I’m still learning, so please be kind and constructive with your feedback!
ICT Directional FVG Indicator (Buffered SL)
This indicator is designed for traders who follow ICT (Inner Circle Trader) concepts, focusing on Fair Value Gaps (FVGs), liquidity sweeps, and session-based trading. It automatically detects bullish and bearish FVGs, highlights them on the chart, and identifies liquidity sweep events. The indicator features three customizable Kill Zones (London, New York, and Asia sessions), each with independent toggles and color-coded backgrounds for clear visual separation.
Key features:
Fair Value Gap Detection: Highlights bullish and bearish FVGs in real time.
Liquidity Sweep Alerts: Marks potential liquidity sweep events for both highs and lows.
Session Kill Zones: Toggle each Kill Zone (London, New York, Asia) independently; background color changes only in enabled zones.
Trade Signal Visualization: Plots entry, stop loss, and take profit levels based on FVG and sweep logic, with a user-defined stop loss buffer.
Customizable Display: Easily enable or disable FVGs, sweeps, trade levels, and each Kill Zone to suit your strategy.
This tool is ideal for ICT-based traders who want a clear, automated view of FVGs, sweeps, and session activity, with full control over which sessions and signals are displayed.
